1. Requirements
...
To ensure your hardware is properly configured follow the instructions in this section. The first thing you may notice on your Android screen is a notification of MG Flasher requesting permission to access your connected peripheral. You must accept these requests for MG Flasher to connect to your vehicle.
...
Accept permission request to grant MG Flasher access to your peripheral.
...
Plug the ENET Wi-Fi adapter into OBD port, open your device settings, find the appropriate Wi-Fi network and connect. On iOS, ensure you enable Flight Mode. Please note, that you must return to your local Wi-Fi or LTE/4G with internet connection to be able to check for support or download/buy new maps and then switch back to the ENET Wi-Fi connection once more for flashing. Your device may have the option to be connected to both the ECU via Wi-Fi and use Cellular Data for internet access if prompted with the follow screen:
...
| Info |
|---|
Select "Use Cellular Data" for internet access in order to download maps |
ENET Cable
Please note, that you must return to your local Wi-Fi or LTE/4G with internet connection to be able to check for support or download/buy new maps and then switch back to the ethernet connection once more for flashing.
| Note |
|---|
...
Prevent flashing failure from mechanical stress on the USB connection by leaving you device on a flat surface. |
iOS users should ensure Flight Mode is enabled and Wi-Fi disabled. The device should be ready to use, if not, configure your device to use an Automatic IP under “Settings” -> “Ethernet”.
...
In your device settings open “Connections” scroll down to “More connection settings” and open “Ethernet”.
...
| Info |
|---|
Tap to enable Ethernet, click "Configure Ethernet device", select "Static IP" and enter the IP addresses above. Save. |
3. Connections
Let’s review how to connect your newly purchased hardware to your smart device and BMW.
...