Tip |
---|
Custom Code v6.0 has been released with App version 293! This update brings cruise control functions to Switchable Maps, Burbles and Max Cooling On-The-Fly, while the car is in motion! Custom Code v6.0 instructions will be updated with photos soon! |
Custom Code v6.9 (to be released soon) allows you to replace the RESUME button with the BC button for map switches
Note |
---|
Custom Code v5.4 (outdated) allows to switch between OTS Octane and Ethanol blends map (up to E50) without the need to reflash the vehicle! Through a simple combination of the Brake Pedal, Accelerator Pedal, Traction Control Button and the Driver Select Switch you can quickly select between mapping. |
Info |
---|
Minimum/maximum OTS map version required to access Switchable Map option. Tuners should contact us about accessing Switchable Maps when using “Custom Flash Menu”. Custom Code v6.0:
Custom Code v5.4:
|
Info |
---|
Support is currently only for F-Series Gen 1 B48 & B58. |
Support for Generation 1 G-Series will be available soon.
...
Expand | ||||||
---|---|---|---|---|---|---|
| ||||||
There is a ~10 second timeout which will cancel your selection if no buttons are pressed. If the selection menu times out, the map slot will not be adjusted and no changes will be saved. |
Expand | ||||
---|---|---|---|---|
| ||||
Driver Experience Switch and MSA Button.
In case your BMW does not have SPORT+ mode you will be limited to Slot #1, #2, #3 and reverting to Slot #0 is possible from SPORT mode by the same sequence - SPORT and 2 quick MSA presses Within the 5 seconds of holding the Gas Pedal at W.O.T position (while still holding the Brake Pedal) you will notice the RPM on the dash will reflect the choice you have selected (ie. 3000 RPM = Slot #3). Release the Brake and Gas Pedals fully to exit the selection process. RPM on the dash will return to actual engine RPM and the Check Engine Light will stop blinking. Now you can enjoy your newly selected map-set! |
...