Versions Compared

Old Version 14

changes.mady.by.user Jacob

Saved on

compared with

New Version 15

changes.mady.by.user Szymon

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Tip

Custom Code v6.9 (current Version) changes the activation button from FAR DOWN to SHORT UP on the rocker switch.

...

.2 has been released with App version

...

326! This update brings cruise control and BC button functions to Switchable Maps, Burbles

...

, Max Cooling, and Antilag On-The-Fly (while the car is in motion)!

As of Custom Code v6.0 instructions will be updated with photos soon!9, the activation button changed from FAR DOWN to SHORT UP on the rocker switch.

Info

All Gen 2 “on-the-fly" options are in development, however, can be adjusted just before a reflash (15 -20 second when using ENET).

...

Expand
titleCustom Code v6.9+
Info

Using Cruise Control buttons and BC button

Tip

Usable while vehicle is in motion

Note

Only available for F-Series B46, B48 and B58 vehicles using select software versions. Support for more is on the way!

  1. Hold the SHORT UP button on the rocker switch for 2 seconds. Check Engine Light (CEL) will flash (blinking at a slow speed) (indicating max cooling selection mode is active)

  2. UP and DOWN buttons on the rocker switch will change RPM to reflect max cooling state

  3. Select your the max cooling state by pressing the RESUME or BC button (CEL will turn off and state will be updated)

Max Cooling is ENABLED when the tachometer shows 1000 RPM.

Max Cooling is DISABLED when the tachometer shows 0 RPM.

There is a ~10 second timeout which will cancel your selection if no buttons are pressed. If the selection menu times out, the max cooling state will not be adjusted and no changes will be saved.

Limitations

  1. Engine must be running.

Expand
titleCustom Code v6.0
Info

Using Cruise Control buttons

Tip

Usable while vehicle is in motion

Note

Only available for F-Series B46, B48 and B58 vehicles using select software versions. Support for more is on the way!

  1. Hold the FAR DOWN button on the rocker switch for 2 seconds. Check Engine Light (CEL) will flash (blinking at a slow speed) (indicating max cooling selection mode is active)

  2. UP and DOWN buttons on the rocker switch will change RPM to reflect max cooling state

  3. Select your the max cooling state by pressing the RESUME button (CEL will turn off and state will be updated)

Max Cooling is ENABLED when the tachometer shows 1000 RPM.

Max Cooling is DISABLED when the tachometer shows 0 RPM.

There is a ~10 second timeout which will cancel your selection if no buttons are pressed. If the selection menu times out, the max cooling state will not be adjusted and no changes will be saved.

Limitations

  1. Engine must be running.

...