| Tip |
|---|
Custom Code v6.9.2 has been released with App version 326! This update brings cruise control and BC button functions to Switchable Maps, Burbles, Max Cooling, and Antilag On-The-Fly (while the car is in motion)! |
...
Hold the FAR UP button on the rocker switch for 2 seconds. Check Engine Light (CEL) will flash (blinking at a medium speed) (indicating burble selection mode is active)
UP and DOWN buttons on the rocker switch will change RPM to reflect burble level
Select your burble level by pressing the RESUME or BC button (CEL will turn off and state will be updated)
Burble Levels:
0 RPM - Default Mode – Aggressiveness level depends on your slider positions.
1000 RPM - Level 1 - This level will be equivalent to the aggressiveness at 20%.
2000 RPM - Level 2 - This level will be equivalent to the aggressiveness at 40%.
3000 RPM - Level 3 - This level will be equivalent to the aggressiveness at 70%.
4000 RPM - Burble OFF - Burbles will now be fully deactivated.
...
CEL will blink twice quickly when enabled and solid when default settings are restored.
Drive Mode must be enabled; manual mode deactivates the selection process.
You must press the MSA button the required number of times within 2.5 seconds for it to be a valid selection.
Engine must be running more than 30 seconds from start
...
| Expand | ||
|---|---|---|
| ||
Default Mode – To switch back to your stock/default settings in any Mode (ECU, Comfort, Sport, Sport+) and push the MSA button six times within 2.5 seconds. The Check Engine Light will blink solid as the confirmation. Level 1 - Switch to ECO Mode via the Driver Experience Switch and push the MSA button four times within 2.5 seconds. The Check Engine Light will blink twice as the confirmation. Then you must return to Sport Mode or Sport Mode+ to hear the changes. Level 2 - Switch to Comfort Mode via the Driver Experience Switch and push the MSA button four times within 2.5 seconds. The Check Engine Light will blink twice as the confirmation. Then you must return to Sport Mode or Sport Mode+ to hear the changes. Level 3 - Switch to Sport Mode via the Driver Experience Switch and push the MSA button four times within 2.5 seconds. The Check Engine Light will blink twice as the confirmation. The changes should be heard immediately, given that you are already in Sport Mode, where burbles are active. Burble OFF - Switch to Sport Mode+ via the Driver Experience Switch and push the MSA button four times within 2.5 seconds. The Check Engine Light will blink twice as the confirmation. |
...