Versions Compared

Old Version 12

changes.mady.by.user Jacob

Saved on

compared with

New Version 13

changes.mady.by.user Szymon

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Tip

Custom Code v6.9.2 has been released with App version 326! This update brings cruise control and BC button functions to Switchable Maps, Burbles, Max Cooling, and Antilag On-The-Fly (while the car is in motion)!

...

Note

Only available for F-Series B46, B48 and B58 vehicles using select software versions. Support for more is on the way!

  1. Hold the FAR UP button on the rocker switch for 2 seconds. Check Engine Light (CEL) will flash (blinking at a medium speed) (indicating burble selection mode is active)

  2. UP and DOWN buttons on the rocker switch will change RPM to reflect burble level

  3. Select your burble level by pressing the RESUME or BC button (CEL will turn off and state will be updated)

Burble Levels:

Expand
titlev7.x and newer

  • 0 RPM - OEM – Aggressiveness level as defined in your stock calibration.

  • 1000 RPM - App Slider – Aggressiveness level depends on your slider positions.

  • 2000 RPM - Level 1 - This level will be equivalent to the aggressiveness at 20%.

  • 3000 RPM - Level 2 - This level will be equivalent to the aggressiveness at 40%.

  • 4000 RPM - Level 3 - This level will be equivalent to the aggressiveness at 70%.

  • 5000 RPM - Burble OFF - Burbles will now be fully deactivated.

Expand
titlev6.x and earlier

  • 0 RPM - Default Mode – Aggressiveness level depends on your slider positions.

  • 1000 RPM - Level 1 - This level will be equivalent to the aggressiveness at 20%.

  • 2000 RPM - Level 2 - This level will be equivalent to the aggressiveness at 40%.

  • 3000 RPM - Level 3 - This level will be equivalent to the aggressiveness at 70%.

  • 4000 RPM - Burble OFF - Burbles will now be fully deactivated.

There is a ~10 second timeout which will cancel your selection if no buttons are pressed. If the selection menu times out, the map slot will not be adjusted and no changes will be saved.

...

  • CEL will blink twice quickly when enabled and solid when default settings are restored.

  • Drive Mode must be enabled; manual mode deactivates the selection process.

  • You must press the MSA button the required number of times within 2.5 seconds for it to be a valid selection.

  • Engine must be running more than 30 seconds from start

...

Expand
titleCustom Code v5.4 and earlier Instructions (Outdated)
Info

Using MSA button

Default Mode – To switch back to your stock/default settings in any Mode (ECU, Comfort, Sport, Sport+) and push the MSA button six times within 2.5 seconds. The Check Engine Light will blink solid as the confirmation.

Level 1 - Switch to ECO Mode via the Driver Experience Switch and push the MSA button four times within 2.5 seconds. The Check Engine Light will blink twice as the confirmation. Then you must return to Sport Mode or Sport Mode+ to hear the changes.

Level 2 - Switch to Comfort Mode via the Driver Experience Switch and push the MSA button four times within 2.5 seconds. The Check Engine Light will blink twice as the confirmation. Then you must return to Sport Mode or Sport Mode+ to hear the changes.

Level 3 - Switch to Sport Mode via the Driver Experience Switch and push the MSA button four times within 2.5 seconds. The Check Engine Light will blink twice as the confirmation. The changes should be heard immediately, given that you are already in Sport Mode, where burbles are active.

Burble OFF - Switch to Sport Mode+ via the Driver Experience Switch and push the MSA button four times within 2.5 seconds. The Check Engine Light will blink twice as the confirmation.

...