Versions Compared

Old Version 1

changes.mady.by.user Szymon

Saved on

compared with

New Version 2

changes.mady.by.user Szymon

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

...

...

...

Info

Details about Burbles On-The-Fly can be found in the main article: Burbles On-The-Fly

Note

If you have Custom code v7.0.x or older, see instructions here: [Outdated] Configure Burbles On-The-Fly Before Custom Code v7.1

Selecting a Burble slot/level

  1. Enter the Custom Code Menu (CCM). Let go once the Check Engine Light (CEL) starts blinking slowly.

    Custom Code Menu details can be found here: [WIP] Custom Code Menu (CCM)

Image AddedImage Added

OR

Image Added

OR

Image Added

  1. Move rocker up and down to navigate through the Custom Code Menu until you reach 2000 RPM (the Burbles submenu).

Info

UniRocker uses far up/down on the rocker to navigate the menu. RockerCombo uses short up/down.

Image AddedImage Added

  1. Using your button configuration, press “enter” to continue into the Burbles submenu.

Info

UniRocker: hold short up/down on the rocker to enter a submenu. RockerCombo: hold BC or RES button.

  1. Once entered, the Check Engine Light (CEL) will blink 2 times showing you have entered into the Burbles submenu.

Image Added

  1. Select the burble slot/level you want by using short or far up/down on the rocker to increase/decrease the RPM shown on the tachometer.

Info

UniRocker: far up/down on the rocker to adjust values. RockerCombo: uses short up/down.

  • 0 RPM - Slot 0, OEM

  • 1000 RPM - Slot 1, App Slider

  • 2000 RPM - Slot 2, Level 1

  • 3000 RPM - Slot 3, Level 2

  • 4000 RPM - Slot 4, Level 3

  • 5000 RPM - Slot 5, Burble OFF

Image Added

OR

Image Added

  1. Using your button configuration, press “enter” to accept the burble slot/level.

Info

UniRocker: hold short up/down on the rocker to accept. RockerCombo: hold BC or RES button.

Image Added

OR

Image Added