...
Auto logging function – when you press “Auto ON” logger will automatically start logging while you press the accelerator pedal rapidly and stop logging when the pedal is released for longer than 2 seconds.
Adjusting the measured parameters can be done in Log parameters page.
Adjusting the displayed gauges can be done in the Display config page. Options Include:
Which Gauges are visible
Type of Gauge
Size of Gauge
Scale Ratio of Gauge
Auto Fitting to Gauge Dashboard
Colors of the Gauges
Status colour Green title NEW
Allows to log MASTER and SLAVE ECU module if dual ECUs are present in the car.
Exporting created files to one of our destinations: MG Flasher Logs Cloud, or Spoolstreet and of course.
Dynamic Gauge Dashboard that allows for moving, resizing and changing the Gauge Type.
Single measurement time decreased up to 2x times in comparison to our previous logger solution.
...
Unlock/Lock manual gauge adjustment - allows to move the gauges by finger
Auto adjust the gauges - automatically gauge adjustment to fill all available space
Enable/Disable auto log to file - controls behavior which activates the feature to automatically start the file logging once the car’s pedal is pressed to the floor!
Go to parameters settings - configure the logged parameters from ECU. It also contains some development options together with uploading custom logger param definitions which is available only for specific user roles
Go to units settings - controls logged & displayed units for given parameters group
Go to display settings - controls the visible gauges in the dashboard and its colors
| Info |
|---|
Logger parameters settings page |
...
Manages the parameters which should be read from the car. It allows to control . The list of parameters can be filtered by typing anything into the search bar. Tabs allow control of MASTER and SLAVE module modules separately by switching to concrete tab.
Preferences tab contains an option to log & present parameters with user friendly name or factory technical name.
...