Tip |
---|
Introducing a new button configuration, UniRocker. Together with RockerCombo, these button configurations are used to navigate and control the CCM: Button Configurations |
...
Each Custom Code feature, which is available On-The-Fly, has its own dedicated submenu. Once a submenu is accessed, users will be able to configure said feature. If the submenu for Switchable Maps is accessaccessed, then users will be able to choose which slot should be activated. The following image can be used as a quick reference for which settings are available in each submenu:
...
The CCM uses two sections of the steering wheel for all functionality, A: Cruise Control Buttons and CB: Turn Signal Stalk. Media Control Buttons have no Custom Code functionality, they are not used. The names or icons on your steering wheel may differ, for this article, we will reference the steering wheel from our development F-Series Gen 1 vehicle. The button position is key for it’s functionality, take note of where your buttons are located in comparison to these images.
...
With the RockerCombo button configuration:
With the UniRocker button configuration:
The amount of time the button must be held can be adjusted in app when flashing; this option is called Delay to Enter Menu under the “Custom Code Menu” settings on the “Custom Options” flashing page. | When using UniRocker: When using RockerCombo: OR |
...
Once in the Custom Code Menu, users can briefly press the BC or RES buttons (with RockerCombo) or hold the short up/down rocker button (with UniRocker) to navigate into a submenu. For UniRocker: The amount of time the button must be held can be adjusted in app when flashing; this option is called UniRocker enter button delay under the “Custom Code Menu” settings on the “Custom Options” flashing page. | When using UniRocker: When using RockerCombo: OR |
...