Page Comparison

1. Enter the Custom Code Menu (CCM). Let go once the Check Engine Light (CEL) starts blinking slowly.

   Custom Code Menu details can be found here: Custom Code Menu (CCM)

OR

OR

2. Move rocker up and down to navigate through the Custom Code Menu until you reach 5000 RPM (the Burbles Ethanol Content Override submenu).

3. Using your button configuration, press “enter” to continue into the Burbles submenu.

4. Once entered, the Check Engine Light (CEL) will blink 5 times showing you have entered into the Burbles Ethanol Content Override submenu.

5. Select the override status you want by using short or far up/down on the rocker to increase/decrease the RPM shown on the tachometer.

OR

You have the option of enabling or disabling the override feature. 0 RPM will disable the override, 1k RPM will enable the override and take you to the submenu (to select the override value)

7. Using your button configuration, press “enter” to accept the override status.

OR

8. If you selected to disable the override feature (0 RPM), you’re all done! The menu will close and the instrument cluster will return to normal operation.
   If you enabled the override feature (1K RPM), you can now configure the ethanol content override value as desired, by using short or far up/down on the rocker to increase/decrease the RPM shown on the tachometer. You can hold up/down to adjust the value more quickly

OR

9. Using your button configuration, press “enter” to accept the displayed ethanol content override value setpoint.

OR