MG Flasher users can read some diagnostics data from their car without any license requirements. To do that you have to switch to Diagnostics page which is accessible once a car is connected. |
The Diagnostics page is specially dedicated for diagnosis, troubleshooting, reset adaption, restore coding, restore backup It contains following modules:
Information regards ECU software and coding.
Reads all error codes from the ECU with their description for troubleshooting.
Clears all error codes from the ECU.
Downloads stock map available on the MG Flasher server.
Opens the exhaust flap. This may slightly improve performance.
Closes the exhaust flap.
The ECU will automatically change the exhaust flap position, based on calibration/map.
Select to reset various adaptations such as mixture adaptation, VANOS, fuel system, Valvetronic Lift and increment wheel.
This will reset the engine ECU
Resets car’s internal network. May help with ENET connectivity issues.
Turns on the car's ignition.
Turns off the car's ignition.
Tests ability to open wastegate.
Tests ability to close wastegate.
The ECU will automatically change the wastegate position, based on calibrations/maps.
This test will let you know the minimum and maximum points for open and closed positions of the wastegate. It is used as a guide to adjust the wastegate arm to operate within safe limits.
When the original coding is lost, corrupted or during the flashing was not performed you can restore coding manually. Go to “ECU info” to check coding status. Check the last position on the list example CAFD.X.X.X.
Restore factory software. This will uninstall MG Flasher and relock ECU. It will lock your ECU and increase flashing counter - flashing time ~5 minutes. If the ECU had a bench or Femto unlock, it will be entirely removed and require another unlock.
Reads BTLD, PST & DST from ECU to bin file. Only available when ECU has not been activated/unlocked. Process will fail if it doesn't have fully stock software.
It is recommended to only use these options when requested by MG Flasher Support! |