Custom Code DTCs
MG Flasher has added diagnostic logging of error codes (DTCs) into the latest update of Custom Code (v7.2) when checked with app v395 or newer. You can clear these codes using the in-app Diagnostic page “Clear DTCs” button. If the conditions are back to normal, the DTCs will clear, however, if the errors are still present, the DTCs will not clear.
DTC Code | Description |
|---|---|
MGF001 | Limp mode active |
MGF002 | Motiv ReFlex error |
MGF003 | Ethanol sensor error |
MGF004 | Low pressure fuel pressure is below threshold (3.0 bar) |
MGF005 | Ethanol sensor timeout (10s has passed since a message from the ECA was received) |
MG Flasher @ 2021