...
...
1. Requirements
Android and iOS users
Android 7.1, iOS 10.0 or newer operating system
ENET Wi-Fi adapter, ENET cable – It is strongly recommended to use ENET Wi-Fi connection for its fast speed and to reduce the risk of cables disconnecting
Ethernet to USB adapter if using ENET cable
...
NOTE: The Micro-USB plug was replaced on modern devices with USB Type C. Determine which of these two plugs is appropriate for your device and purchase any required adapters with the correct interface.
...
Left: Micro USB – OTG adapter. Right: USB Type-C OTG adapter.
...
Left: Micro USB – Ethernet adapter. Middle: Lightning – Ethernet adapter. Right: USB Type-C – Ethernet adapter.
ENET cable (connected through an ethernet adapter to a phone)
...
MG Flasher’s ENET Wi-Fi Adapter
2. Configuration
To ensure your hardware is properly configured follow the instructions in this section. The first thing you may notice on your Android screen is a notification of MG Flasher requesting permission to access your connected peripheral. You must accept these requests for MG Flasher to connect to your vehicle.
...
Accept permission request to grant MG Flasher access to your peripheral.
...
Tap to enable Ethernet, click "Configure Ethernet device", select "Static IP" and enter the IP addresses above. Save.
3. Connections
Let’s review how to connect your newly purchased hardware to your smart device and BMW.
...
Locate the OBD II port (in the driver’s footwell) and connect the Wi-Fi Adapter to the OBD II port.
...
4. Usage
If you have followed along and gotten this far without any problems, your android device is now ready to use with MG Flasher. Launch the application and follow the usage instructions in our User Manual. Enjoy!
...