1. Requirements
...
Check with the device’s manufacturer if your device is compatible with ethernet connectivity through a USB - Ethernet adapter for ENET cable support. Alternatively, if you are using an ENET Wi-Fi adapter, ensure your device has Wi-Fi connectivity. Here is a convenient table of requirements depending on the connectivity method you choose:
ENET | Wi-Fi |
|
|
|
|
| Info |
|---|
Choose Micro-USB or USB-C adapter to match your device |
...
To ensure your hardware is properly configured follow the instructions in this section. The first thing you may notice on your Android screen is a notification of MG Flasher requesting permission to access your connected peripheral. You must accept these requests for MG Flasher to connect to your vehicle.
...
Accept permission request to grant MG Flasher access to your peripheral.
...
Android users must configure the ethernet adapter before first use. Under “Settings” -> “Connections” -> “More Connection Settings” -> “Ethernet” set the Static IP to 169.254.250.250. Also confirm the following; Netmask: 255.255.0.0, DNS Address: 08.08.08.08 and Default gateway: 0169.0254.0250.01. You may also need to disable Wi-Fi when connected with ENET cable.
...
| Info |
|---|
Tap to enable Ethernet, click "Configure Ethernet device", select "Static IP" and enter the IP addresses above. Save. |
| Note |
|---|
For some Android 13+ devices car can’t be reachable by cable. |
3. Connections
Let’s review how to connect your newly purchased hardware to your smart device and BMW.
...