Page Comparison

1. Stop the vehicle (below speed threshold to detect rolling) and hold far down (second click downward) on the rocker.

2. Engine light will blink rapidly. Don’t let go until the last step!

3. While still holding far down on the rocker, press the throttle pedal to have ignition cut, timing retarded and to start building boost . Pedal position for activation, timing aggression, and target boost can be adjusted in-app during flashing.

4. Release the rocker switch when ready to launch (sit back first!).

1. Hold down RES or BC Button to enter Menu. Let go once Check Engine Light starts blinking.

OR

2. Move rocker up and down to navigate through the menu until hitting Custom Code Menu until you reach 4000 RPM (the Antilag submenu).

3. Press RES or BC Button to enter into

3. the Antilag submenu.

4. Once entered into 4000 RPM , the Check Engine Light (CEL) will blink 4 times showing you have entered into the Antilag submenu.

6. Configure launch RPM

6. Tap or hold SHORT UP/DOWN as desired, by using rocker up/down. using short up/down (first click up/downward) on the rocker to increase/decrease the RPM shown on the tachometer. You can hold up/down to adjust the value more quickly

OR

7. Press RESUME or BC button to accept the setting displayed RPM setpoint.

OR