...
Please connect your car to the MG Flasher using Connect button.
After the successful connection press Open Car button.
You should see the page with available Logger button.
Logger access is possible anytime while rolling, or driving.
Status colour Green title NEW - since v423
Creating a Log
The log should consist of a full acceleration drive at WOT (wide open throttle) across a large rpm range in a gear that is closely matching the engines output shaft rotational speed. To do this:
...
Manages the parameters which should be read from the car. The list of parameters can be filtered by typing anything into the search bar. Tabs allow control of MASTER and SLAVE modules separately. Track car location enables adding GPS coordinates of the car to the log file
| Status | ||||
|---|---|---|---|---|
|
Preferences tab contains an option to log & present parameters with user friendly name or factory technical name.
...
Contains the list of parameters which are able to be displayed in the dashboard based on logger parameters defined enabled in Logger Parameters page. Each item in list is configurable in two ways. Shorter path allows you to click on the badges to change the gauge type or visibility immediately. The second path required to click on given gauge item in list which will navigate to Gauge Item page where you can edit more fields: Visibility, Aspect Ratio, Height, Width, Gauge Type. By switching to the colors tab you can select one of the three available colors.
Once you finish the configuration you can adjust the visible items using one of the supported algorithm by clicking the MISC button:
Adjust to grid - Takes first 8 items and align them to the precisly located positions.
Adjust to fit all items - Takes maximum 20 items and align them to fit all available place in gauges dashboard
| Note |
|---|
Regardless of the algorithm all visible items which cannot be shown due to exceed of maximum allowed gauges count will be marked as hidden. |
...
Double touch on the selected gauge and select EDIT option. The current page allows you to change the gauge type.
Go to Logger Display settings and click the MISC button to change the gauge type for all items simultaneously
Go to Logger Display settings and click the badge of the item presented in list
Go to Logger Display settings and click the options item to redirect you to Gauge Item page
| Info | ||||||
|---|---|---|---|---|---|---|
Change gauges color
|
Colors tab in Display settings allow changing to one of the three available colors:
| Status | ||
|---|---|---|
|
| Status | ||||
|---|---|---|---|---|
|
| Status | ||||
|---|---|---|---|---|
|
...