Versions Compared

Old Version 8

changes.mady.by.user Szymon

Saved on

compared with

New Version 9

changes.mady.by.user Szymon

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Tip

Custom Code v6.0 has been released with App version 293! This update brings cruise control functions to Switchable Maps, Burbles and Max Cooling On-The-Fly! Custom Code v6.0 instructions will be updated with photos soon!

Custom Code v6.9 (to be released soon) allows you to use either RESUME or BC buttons to confirm your selection.

With the dynamic burble feature, flashing your car every time you want to adjust the intensity of the burbles will be a thing of the past! Via cruise control buttons on Custom Code v6.0 or a simple combination of the Driving Experience Switch and the MSA button on Custom Code v5.4 (and earlier) you can change the intensity of the burbles ON THE FLY!

...

  • The car must be above 50-degree coolant temperature and engine running for longer than ~30 seconds for burbles to activate.

  • The burble level adjusted by the Aggressiveness Slider during your last OTS map flash will be the default aggressiveness adjustment without any of the above-mentioned selections. This "default" mode will be activated each time when vehicle is started after sleep mode.

  • Engine must be running (more than 30 seconds from start when using Custom Code v5.4 and earlier, Custom Code v6.0 can be used as soon as engine starts).

  • Custom Code v5.4 and earlier:

    • CEL will blink twice quickly when enabled and solid when default settings are restored.

    • Drive Mode must be enabled; manual mode deactivates the selection process.

    • You must press the MSA button the required number of times within 2.5 seconds for it to be a valid selection.

Burble Aggression Levels

  • Default Mode – Aggressiveness level depends on your slider positions.

  • Level 1- This level will be equivalent to the aggressiveness at 20%.

  • Level 2 - This level will be equivalent to the aggressiveness at 40%.

  • Level 3 - This level will be equivalent to the aggressiveness at 70%.

  • Burble OFF - Burbles will now be fully deactivated.

...

Expand
titleCustom Code v6.0+
Info

Using Cruise Control buttons

Tip

Usable while vehicle is in motion

Note

Only available for F-Series B46, B48 and B58 vehicles using select software versions. Support for more is on the way!

  1. Hold the FAR UP button on the rocker switch for 2 seconds. Check Engine Light (CEL) will flash (blinking at a medium speed) (indicating burble selection mode is active)

  2. UP and DOWN buttons on the rocker switch will change RPM to reflect burble level

  3. Select your burble level by pressing the RESUME button (CEL will turn off and state will be updated) (or BC button in Custom Code v6.9+)

Burble Levels:

  • 0 RPM - Default Mode

  • 1000 RPM - Level 1

  • 2000 RPM - Level 2

  • 3000 RPM - Level 3

  • 4000 RPM - Burble OFF

There is a ~10 second timeout which will cancel your selection if no buttons are pressed. If the selection menu times out, the map slot will not be adjusted and no changes will be saved.

Expand
titleCustom Code v5.4 and earlier
Info

Using MSA button

Default Mode – To switch back to your stock/default settings in any Mode (ECU, Comfort, Sport, Sport+) and push the MSA button six times within 2.5 seconds. The Check Engine Light will blink solid as the confirmation.

Level 1 - Switch to ECO Mode via the Driver Experience Switch and push the MSA button four times within 2.5 seconds. The Check Engine Light will blink twice as the confirmation. Then you must return to Sport Mode or Sport Mode+ to hear the changes.

Level 2 - Switch to Comfort Mode via the Driver Experience Switch and push the MSA button four times within 2.5 seconds. The Check Engine Light will blink twice as the confirmation. Then you must return to Sport Mode or Sport Mode+ to hear the changes.

Level 3 - Switch to Sport Mode via the Driver Experience Switch and push the MSA button four times within 2.5 seconds. The Check Engine Light will blink twice as the confirmation. The changes should be heard immediately, given that you are already in Sport Mode, where burbles are active.

Burble OFF - Switch to Sport Mode+ via the Driver Experience Switch and push the MSA button four times within 2.5 seconds. The Check Engine Light will blink twice as the confirmation.

...