Using Switchable Maps On-The-Fly

Details about Switchable Maps On-The-Fly can be found in the main article: Switchable Maps On-The-Fly

Selecting a Switchable Maps slot

Enter the Custom Code Menu (CCM). Let go once the Check Engine Light (CEL) starts blinking slowly. Custom Code Menu details can be found here: Custom Code Menu (CCM)	OR OR
Move rocker up and down to navigate through the Custom Code Menu until you reach 1000 RPM (the Switchable Map submenu). UniRocker uses far up/down on the rocker to navigate the menu. RockerCombo uses short up/down.
Using your button configuration, press “enter” to continue into the Switchable Map submenu. UniRocker: hold short up/down on the rocker to enter a submenu. RockerCombo: hold BC or RES button.
Once entered, the Check Engine Light (CEL) will blink 1 times showing you have entered into the Switchable Map submenu.
Select the Switchable Map slot you want by using short or far up/down on the rocker to increase/decrease the RPM shown on the tachometer. UniRocker: far up/down on the rocker to adjust values. RockerCombo: uses short up/down. 0 RPM - Slot 0, OEM map locations 1000 RPM - Slot 1, Custom map location 2000 RPM - Slot 2, Custom map location 3000 RPM - Slot 3, Custom map location 4000 RPM - Slot 4, Custom map location	OR
Using your button configuration, press “enter” to accept the Switchable Map slot. UniRocker: hold short up/down on the rocker to accept. RockerCombo: hold BC or RES button.	OR