Versions Compared

Old Version 3

changes.mady.by.user Szymon

Saved on

compared with

New Version Current

changes.mady.by.user Szymon

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

...

...

...

Info

Details about Valet Mode On-The-Fly can be found in the main article: Valet Mode On-The-Fly

Vehicle's ignition needs to be on.

Note

When one of the limits have been exceeded in valet mode, the check engine light starts blinking and stays on until valet is turned off.

Enable or Disable Valet Mode

  1. Enter the Custom Code Menu (CCM). Let go once the Check Engine Light (CEL) starts blinking slowly.

    Custom Code Menu details can be found here: Custom Code Menu (CCM)

 

Image AddedImage Added

OR

Image Added

OR

Image Added

 

  1. Move rocker up and down to navigate through the Custom Code Menu until you reach 7000 RPM (the Valet Mode submenu).

Info

UniRocker uses far up/down on the rocker to navigate the menu. RockerCombo uses short up/down.

Image AddedImage Added

  1. Using your button configuration, press “enter” to continue into the Valet Mode submenu.

Info

UniRocker: hold short up/down on the rocker to enter a submenu. RockerCombo: hold BC or RES button.

 

  1. Once entered, the Check Engine Light (CEL) will blink 7 times showing you have entered into the Valet Mode submenu.

Image Added

 

  1. Select the Valet Mode status you want by using short or far up/down on the rocker to increase/decrease the RPM shown on the tachometer.

Info

UniRocker: far up/down on the rocker to adjust values. RockerCombo: uses short up/down.

 

0 RPM - Disabled

1000 RPM - Enabled

Image Added

OR

Image Added

  1. Using your button configuration, press “enter” to accept the Valet Mode status.

Info

UniRocker: hold short up/down on the rocker to accept. RockerCombo: hold BC or RES button.

 

Image Added

OR

Image Added

Sub Menu:

Disabled

ECU will operate as normal.

Image Added

Enabled

Valet Mode will be enabled and the ECU will use parameters set in-app.

Image Added

Exceed limit has been flagged:

When one of the limiters has been exceeded in valet mode, the check engine light is blinking and stays on until valet is turned off.

Image Added