Custom Code DTCs

Owned by Szymon
Last updated: Dec 05, 2024
1 min read

MG Flasher has added diagnostic logging of error codes (DTCs) into the latest update of Custom Code (v7.2) when checked with app v395 or newer. You can clear these codes using the in-app Diagnostic page “Clear DTCs” button. If the conditions are back to normal, the DTCs will clear, however, if the errors are still present, the DTCs will not clear.

MGF Limp Mode Protection can be disabled from the flashing option menu if you so choose. These DTCs may still appear (if such an error is detected), but no check engine light and no power limiters.

DTC Code

Description

DTC Code

Description

MGF001

Limp mode active

MGF002

Motiv ReFlex error

MGF003

Ethanol sensor error

MGF004

Low pressure fuel pressure is below threshold (3.0 bar)

MGF005

Ethanol sensor timeout (10s has passed since a message from the ECA was received)

 

MG Flasher @ 2024