Button Configurations

Navigating and controlling the Custom Code Menu (CCM) is done with two different cruise control button configurations: UniRocker (default) and RockerCombo. Due to a recent OEM software update, the required CAN bus messages from the cruise control module were filtered and only data from the rocker button can be seen by the DME. This prompted an alternative button configuration for navigating and controlling the CCM, hence, UniRocker was created. Users with vehicles which support both button configurations may choose which configuration they would like to use on the Custom Options flashing page, under the Custom Code Menu sub-menu.

To check if your vehicle supports RockerCombo, navigate the MGF app (on the newest app version) to the diagnostic’s page and press “Read ECU Info”. Near the bottom of the page, there will be info about “RockerCombo Support”.