/
Ethanol Content Override

Ethanol Content Override

Owned by Szymon
Last updated: Oct 30, 2023 by Jarek
4 min read

Details about Ethanol Content Override can be found in the main article: Ethanol Content

Check the active ethanol content using the Ethanol Content Display feature!

This feature is to override the ethanol content value read from a sensor (or instead of using a sensor). It is useful in situations where an ECA (Ethanol Content Analyzer) sensor is not installed or is malfunctioning.

Enable/Disable Ethanol Content Override

  1. Enter the Custom Code Menu (CCM). Let go once the Check Engine Light (CEL) starts blinking slowly.

    Custom Code Menu details can be found here: Custom Code Menu (CCM)

 

(UniRocker) Short up on rocker
(UniRocker) Short down on rocker

OR

(RockerCombo) RES Button located with Cruise Control Buttons

OR

(RockerCombo) BC Button located behind Steering Wheel

 

  1. Move rocker up and down to navigate through the Custom Code Menu until you reach 5000 RPM (the Ethanol Content Override submenu).

UniRocker uses far up/down on the rocker to navigate the menu. RockerCombo uses short up/down.

Rocker located beside RES Button
Tachometer at 5K RPM

  1. Using your button configuration, press “enter” to continue into the Burbles submenu.

UniRocker: hold short up/down on the rocker to enter a submenu. RockerCombo: hold BC or RES button.

 

  1. Once entered, the Check Engine Light (CEL) will blink 5 times showing you have entered into the Ethanol Content Override submenu.

Check Engine Light blinking 5X

 

  1. Select the override status you want by using short or far up/down on the rocker to increase/decrease the RPM shown on the tachometer.

UniRocker: far up/down on the rocker to adjust values. RockerCombo: uses short up/down.

 

Down on rocker

OR

Up on rocker

You have the option of enabling or disabling the override feature. 0 RPM will disable the override, 1k RPM will enable the override and take you to the submenu (to select the override value)

Enabling override

  1. Using your button configuration, press “enter” to accept the override status.

UniRocker: hold short up/down on the rocker to accept. RockerCombo: hold BC or RES button.

 

RES Button located with Cruise Control Buttons

OR

BC Button located behind Steering Wheel

  1. If you selected to disable the override feature (0 RPM), you’re all done! The menu will close and the instrument cluster will return to normal operation.
    If you enabled the override feature (1K RPM), you can now configure the ethanol content override value as desired, by using short or far up/down on the rocker to increase/decrease the RPM shown on the tachometer. You can hold up/down to adjust the value more quickly

UniRocker: far up/down on the rocker to adjust values. RockerCombo: uses short up/down.

Down on rocker

OR

Up on rocker

  1. Using your button configuration, press “enter” to accept the displayed ethanol content override value setpoint.

UniRocker: hold short up/down on the rocker to accept. RockerCombo: hold BC or RES button.

 

RES Button located with Cruise Control Buttons

OR

BC Button located behind Steering Wheel

 

Related content

MG Flasher @ 2025