Using Max Cooling On-The-Fly

Owned by Szymon
Last updated: Oct 25, 2023

Details about Max Cooling On-The-Fly can be found in the main article: https://mgflasher.atlassian.net/wiki/spaces/MGFLASHER/pages/28475429

If you have Custom code v7.0.x or older, see instructions here: https://mgflasher.atlassian.net/wiki/spaces/MGFLASHER/pages/691863559

Vehicle's ignition has to be on.

Enable or Disable Max Cooling

  1. Enter the Custom Code Menu (CCM). Let go once the Check Engine Light (CEL) starts blinking slowly.

    Custom Code Menu details can be found here: https://mgflasher.atlassian.net/wiki/spaces/MGFLASHER/pages/660766721

 

(UniRocker) Short up on rocker
(UniRocker) Short down on rocker

OR

OR

 

  1. Move rocker up and down to navigate through the Custom Code Menu until you reach 3000 RPM (the Max Cooling submenu).

  1. Using your button configuration, press “enter” to continue into the Max Cooling submenu.

 

  1. Once entered, the Check Engine Light (CEL) will blink 3 times showing you have entered into the Max Cooling submenu.

 

  1. Select the Max Cooling status you want by using short or far up/down on the rocker to increase/decrease the RPM shown on the tachometer.

 

0 RPM - Disabled

1000 RPM - Enabled

OR

  1. Using your button configuration, press “enter” to accept the Max Cooling status.

 

OR

Disabled

ECU will use “Regular Cooling” parameters set in-app.

 

 

Enabled

Max Cooling will be enabled and the ECU will use parameters set in-app.

 

 

 

MG Flasher @ 2021