Using Max Cooling On-The-Fly

Details about Max Cooling On-The-Fly can be found in the main article: Max Cooling On-The-Fly

If you have Custom code v7.0.x or older, see instructions here: [Outdated] Configure Max Cooling On-The-Fly Before Custom Code v7.1

Vehicle's ignition has to be on.

Enable or Disable Max Cooling

Enter the Custom Code Menu (CCM). Let go once the Check Engine Light (CEL) starts blinking slowly. Custom Code Menu details can be found here: Custom Code Menu (CCM)	(UniRocker) Short up on rocker (UniRocker) Short down on rocker OR (RockerCombo) RES Button located with Cruise Control Buttons OR (RockerCombo) BC Button located behind Steering Wheel
Move rocker up and down to navigate through the Custom Code Menu until you reach 3000 RPM (the Max Cooling submenu). UniRocker uses far up/down on the rocker to navigate the menu. RockerCombo uses short up/down.	Rocker located beside RES Button Tachometer at 3K RPM
Using your button configuration, press “enter” to continue into the Max Cooling submenu. UniRocker: hold short up/down on the rocker to enter a submenu. RockerCombo: hold BC or RES button.
Once entered, the Check Engine Light (CEL) will blink 3 times showing you have entered into the Max Cooling submenu.	Check Engine Light blinking 3X
Select the Max Cooling status you want by using short or far up/down on the rocker to increase/decrease the RPM shown on the tachometer. UniRocker: far up/down on the rocker to adjust values. RockerCombo: uses short up/down. 0 RPM - Disabled 1000 RPM - Enabled	Down on rocker OR Up on rocker
Using your button configuration, press “enter” to accept the Max Cooling status. UniRocker: hold short up/down on the rocker to accept. RockerCombo: hold BC or RES button.	RES Button located with Cruise Control Buttons OR BC Button located behind Steering Wheel